| |
Pneumatic or hydraulic, lean-phase, fluid-phase or slug conveying – Coperion Waeschle has the right conveying process.
 to conveying processes
|
|
 |
Individual challenges call for tailored solutions, especially when the tasks are becoming ever more complex and multi-layered and quality standards are set ever higher. Greater efficiency for less cost – Coperion Waeschle lives up to these heightened requirements with a wide range of innovative conveying solutions and components which are being further developed through focused research.
Whether for powders or pellets, our range of valves is setting new standards for highperformance applications. For example, we have developed special valves for powder conveying which are equipped to act both as a blow-through and discharge valve with maximum performance.
In addition to this, to meet special requirements we also use pressurized vessels. The range of conveying processes, which are used for the widest variety of tasks, offers optimal operating conditions.
| Details |  |  |
INTACON® – intelligent gas volume control
INTACON® is a control system for CONTI-SCHUB® or TAKT-SCHUB® systems. Optimal and fullyautomatic control of conveying pres-sure and conveying gas volumes, in combination with the LMR-X and LMR-7 gas volume control units.
Pressure- and speed-optimized blowing empty of the conveying pipe.
Special bearings to reduce forces
To absorb the forces on the pipe generated during slug conveying. Using the latest calculation methods, special bearings have been developed with flexible elements that significantly reduce the stresses on pipe supports and foundations.
| Conveying process | | |
|
|
Lean-phase conveying – FLUIDLEAN®
For most products in powder, fluff and
pellet form. |
 |
|
Strand conveying – FLUIDLIFT®
For most products in powder, fluff and
pellet form. |
 |
|
Fluid-phase conveying – SUPERDENSE®
For fluidizable powders, conveying with very high product to gas ratio. | - | | Conveying gas and energy optimized |
| - | | Gentle to product |
| - | | Lower investment costs |
|
 |
|
Fluid-phase conveying – FLUIDSTAT®
For fluidizable powders, internal bypass reduces the risk of pipe pluggage. | - | | Reduced conveying gas volume |
| - | | Lower investment costs |
|
 |
|
Slug conveying – FLUIDSPLIT®
For all powder products, bypass system with self-regulating, controlled injection of bypass air. | - | | Reduced conveying gas volumes |
| - | | Safe, economical and gentle to product |
|
 |
|
Slug conveying – CONTI-SCHUB®
For pellets with regular particle shape,
high pressure (up to 6 bar). | - | | High performance |
| - | | Long conveying distances |
| - | | Gentle to product |
| - | | Avoids dust and streamer formation |
|
 |
|
Slug conveying – TAKT-SCHUB®
For pellets with regular particle shape, process for high turndown capacity, unfavorable isometries or highly porous products. | - | | Controlled slug formation at pickup point |
| - | | Allows for high variability in throughput |
|
 |
|
Hydraulic conveying – CONTICON®
For all pellets. | - | | Maximum product quality |
| - | | Long conveying distances and / or high capacities |
| - | | Economical, low energy consumption |
|
| |
Type of conveying |
Brand name |
Speed |
Products |
 |
Lean-phase conveying |
FLUIDLEAN® |
25 - 40 m/s |
Powders, fluffs, pellets |
 |
Strand conveying |
FLUIDLIFT® |
15 - 30 m/s |
Powders, fluffs, pellets |
 |
Fluid-phase conveying |
SUPER-DENSE® |
8 - 20 m/s |
Fluidizable powders |
 |
Stabilized fluid-phase conveying |
FLUIDSTAT® |
8 - 20 m/s |
Fluidizable powders |
 |
Stabilized slug conveying |
FLUID-SCHUB® |
4 - 10 m/s |
Non-fluidizable powders Abrasive powders |
 |
Slug conveying |
CONTI-SCHUB® |
4 - 10 m/s |
Pellets |
 |
Slug conveying |
TAKT-SCHUB® |
4 - 10 m/s |
Pellets |
 |
Hydraulic conveying |
CONTICON® |
1 - 5 m/s |
Pellets |
|
|